BESTCOAT CR

Type: A single pack, low build, Chlorinated Rubber based coating.

Uses:A hardwearing, chemical resistant finish for use in laboratories, chemical factories, breweries, dairies, food factories and bottling plants, hospitals, clinics etc. Widely used on steelwork in chemical plants and marine environments

Substrates: Can be applied to suitably prepared metal, timber, plaster and concrete swimming pools.

ADVANTAGES:

Rapid drying. Non-toxic. Excellent weather, chemical, abrasion & corrosion resistance. Superb flexibility and maintenance properties (it may be over coated with a minimum of preparation many years after application). Can be used at temps. Below 10 degrees C. which epoxy paints canʼt. Conditions during application; The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of the air, measured near the substrate. Good ventilation is required in confined areas to ensure proper drying. The moisture content in the substrate should not exceed 3% (by weight). The coating should not be exposed to oil, chemicals or mechanical stress until fully cured.

Bestcoat CR